To measure a driveway or patio, trace it on the satellite map with an area measurement: the app shows the area and the perimeter. For concrete, multiply the area by the thickness. In feet, area (ft²) × thickness (in) ÷ 12 ÷ 27 gives cubic yards; in meters, area (m²) × thickness (m) gives cubic meters. For a straight slab, the Rectangle shape is the quickest.
Measure it
- Tap New measurement and choose Area, or Rectangle under More shapes for a straight slab.
- Place a point on every corner of the paved area. Leave out planters or islands with Subtract an area.
- Read the area, and the perimeter for edging, forms or curbs.
- Tap Save and note the thickness you plan.
From area to material
- Concrete, in feet: cubic yards = area (ft²) × thickness (in) ÷ 12 ÷ 27. A 600 ft² driveway at 4 in needs about 7.4 yd³.
- Concrete, in meters: cubic meters = area (m²) × thickness (m). 50 m² at 0.10 m needs 5 m³.
- Pavers and asphalt: give your supplier the area, and they convert it to pavers, pallets or tonnes.
- Add the allowance your supplier recommends for waste and uneven ground.
How exact is it?
Map lengths are horizontal and only as good as the imagery, and cars, trees and shadows can hide an edge. Check the key dimensions with a tape on site before you order.
Common questions
How much concrete do I need for my driveway? Multiply the area in square feet by the thickness in inches, then divide by 12 and by 27 to get cubic yards.
Can I measure the length of the edging? Yes. The result shows the perimeter, and every side shows its length.
Can I share the measurement with a contractor? Yes. Export a PDF report with the map, the area and the length of every side. See Export and share.