Dipper
Dipper: GPS Area Measure › Help center

How to measure a lot or property size

Updated
App version
1.1
Maintained by
InsightSpatial

To find the size of a lot, tap New measurement, choose Area and place a point on every corner of the property on the satellite map. The app shows the area in acres, square feet, square meters or hectares, and the perimeter. On site, you can walk the boundary or mark its corners with GPS instead. The result is an estimate for planning and comparison, not a legal survey.

Measure the lot

  1. Find the property on the map: search for the address, or go to your current location.
  2. Tap New measurement, choose Area, and add a point at each corner and each change of direction.
  3. Check the outline and tap Done. The result shows the area and perimeter, and every side shows its length.
  4. Tap Save and add the address and notes. Use map location fills in the address.

Read it in the unit you need

Choose the unit in Settings → Area unit, or tap the result to see it in another unit.

Compare with the official size

The size on a deed, plat or listing comes from a survey of the legal boundary. Fences, hedges and driveways don't always follow that line, and map imagery can be shifted, so expect some difference. The app does not know where the legal property lines are: it measures the outline you draw.

Measure on site

If trees hide the boundary or the imagery is old, use Walk an area with GPS, or Mark each corner with GPS for straight sides. Phone GPS is usually good to a few meters; for centimeter-level corners you need an RTK receiver. See GPS area measurement: walk or mark corners.

Share it

Export a PDF report with the map, the area and the length of every side, to send to a buyer, a seller or a contractor. See Export and share.

Common questions

How many square feet are in an acre? 43,560 square feet, so half an acre is 21,780 square feet.

Can the app show my property lines? No. It measures the boundary you trace. For the legal lines, check the plat or deed, or hire a licensed land surveyor.

Why is my result different from the listing? The listing comes from a survey of the legal boundary, while your outline may follow a fence or a hedge, and the imagery can be offset. Small lots are the most sensitive to these differences.

Can I use the result in a boundary dispute? No. Use a licensed land surveyor for property lines and disputes.

Still need help?

Email us and include a screenshot of the screen in question and, for receiver problems, the receiver model. [email protected]